So you have some questions...

How much does it cost? This is probably the most common question I get asked. Due to the nature of the work and the many variables that come into play it is nearly impossible to have a set "price list" however most normal tub reglazing projects will run between $300 and $500. No pressure quotes are as easy as a phone call or an email. 

How long does it last? A properly reglazed surface will last for many years, it has been my experience that with the materials I use that 8-12 years is no problem and with proper care and maintenance 15-20 years can be achieved.

Does it smell? Yes... It is a smelly process, however I use very powerful effective, ventilation devices during the process which helps to minimizes the odor in the home. Once the project is complete the smell will dissipate very quickly, usually within 8-12 hours the smell will no longer be present. Once the material has glossed over there will be no residual or lingering smells.

Will my pets be safe? Pets are fine to stay in the home, it is best however if they are kept away from the bathroom area while the work is being done and for the immediate time afterwards. Also, pets tend to distract me from working and I won't be able to get any work done if I am petting them all day...

I have a fiberglass tub or shower can you reglaze it? Yes, with very few exceptions, I can reglaze most any bathtub or shower. If you have specific concerns about your project just ask!

Can you reglaze tile? In most cases, yes. Ceramic tile takes my coatings very well and can save you a lot of time and headache over replacement.

Cant I replace the tub cheaper? In my experience, no, but you are encouraged to explore all of your options when considering a bathroom renovation. I want my customers to be happy that they chose to reglaze their tub but I will never try to insist that reglazing is the only or best option for everyone.

Will there be any dust or overspray? Yes there will be, however to protect your bathroom and its fixtures, I mask off and cover every surface in the bathroom. This combined with the powerful ventilation system I use will protect your property from contamination.

What about caulking? I remove all the caulk from between the tub and tile line. This ensures that the finish line will be as far back as possible. Also, any caulk that contains silicone will not accept any kind of coating so it must be removed for proper adhesion. Grout should not be used between the tub and tile as it lacks the proper flexibility for an effective seal. Caulking is generally left to the customer to be completed after the finish is cured. However, I can usually arrange to return to re-caulk, inquire if this is something you think you need.

How long does it take? This depends on the project, but most reglazing jobs are completed in one day. 

How long before I can use my tub? The materials I use require 48 hours to cure before being used with water. Some companies advertise that there finishes can be used in as little as 6 hours. However, the material I use is well known for its durability and superior gloss. These qualities are near impossible to achieve with fast curing finishes and I am a firm believer that the high quality results are worth the extra wait.

Won't my tub be slippery with a shiny new glaze on it? With the new finish on your tub it will tend to be more slippery. However, I can add a slip-resistant finish in the bottom of the tub to help reduce the risk of slipping and sliding. This service is always offered and is never charged for. It is highly recommended for rental properties.

How do I clean my reglazed bath tub? Any non-abrasive and non-acidic cleaner will work just fine. Stay away from powdered cleansers such as Comet, Ajax, and Bar Keepers Friend. Also, Soft Scrub despite its name, is very abrasive. Things like Fantastic, 409, Dow Scrubbing Bubbles, Simple Green, and CLR's Kitchen and Bath Cleaner will all work just fine. Rinsing thoroughly after using the tub and after cleaning will be the biggest help in keeping your tub clean. After shower sprays are not recommended as they will cause a waxy build up that will dull the finish. 

My bathtub was refinished before and now its chipping and pealing, what can be done? In most cases I can strip the old coating and start over from scratch. Please call for more details on stripping of old coatings.

I tried to reglaze my bathtub myself and it went horribly wrong! Can you help? In most cases yes! Just give me a call to discuss details and options.

What do I need to do to be ready for my reglazing work to be done? Please have the bathroom cleared of all personal items, removing any items from the tub/shower area as well as removing the shower curtain. Cleaning and dusting the bathroom in advance will also help greatly with the new finish turning out as best as possible. The tub itself does not need to be spotless but a good attempt at cleaning before I arrive is much appreciated.

I plan on remodeling my whole bathroom, when should I have my tub reglazed? It is best to have most of your project complete before the reglazing portion of your remodel. Ideally, it should be one of the last items done in the bathroom. 

What is needed for my reglazing project? There needs to be a working drain in place and access to a water supply. It is critical that any plumbing leaks and drips are repaired in advance of my arrival. Also a window that can be opened and screen removed is needed for proper ventilation, this can be in the same room or in an adjacent room. If it is during the winter months the heat must be working and set at 70 degrees. During summer months if the outside temperature is is over 80 degrees there must be working A/C.